diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c
index 9de0ad5..67d2d10 100644
--- a/drivers/clk/qcom/clock-apq8016.c
+++ b/drivers/clk/qcom/clock-apq8016.c
@@ -23,11 +23,7 @@
 #define APCS_CLOCK_BRANCH_ENA_VOTE (0x45004)
 
 #define SDCC_BCR(n)			((n * 0x1000) + 0x41000)
-#define SDCC_CMD_RCGR(n)		((n * 0x1000) + 0x41004)
-#define SDCC_CFG_RCGR(n)		((n * 0x1000) + 0x41008)
-#define SDCC_M(n)			((n * 0x1000) + 0x4100C)
-#define SDCC_N(n)			((n * 0x1000) + 0x41010)
-#define SDCC_D(n)			((n * 0x1000) + 0x41014)
+#define SDCC_CMD_RCGR(n)		(((n + 1) * 0x1000) + 0x41004)
 #define SDCC_APPS_CBCR(n)		((n * 0x1000) + 0x41018)
 #define SDCC_AHB_CBCR(n)		((n * 0x1000) + 0x4101C)
 
@@ -38,31 +34,10 @@
 #define BLSP1_UART2_BCR			(0x3028)
 #define BLSP1_UART2_APPS_CBCR		(0x302C)
 #define BLSP1_UART2_APPS_CMD_RCGR	(0x3034)
-#define BLSP1_UART2_APPS_CFG_RCGR	(0x3038)
-#define BLSP1_UART2_APPS_M		(0x303C)
-#define BLSP1_UART2_APPS_N		(0x3040)
-#define BLSP1_UART2_APPS_D		(0x3044)
 
 /* GPLL0 clock control registers */
 #define GPLL0_STATUS_ACTIVE BIT(17)
 
-static const struct bcr_regs sdc_regs[] = {
-	{
-	.cfg_rcgr = SDCC_CFG_RCGR(1),
-	.cmd_rcgr = SDCC_CMD_RCGR(1),
-	.M = SDCC_M(1),
-	.N = SDCC_N(1),
-	.D = SDCC_D(1),
-	},
-	{
-	.cfg_rcgr = SDCC_CFG_RCGR(2),
-	.cmd_rcgr = SDCC_CMD_RCGR(2),
-	.M = SDCC_M(2),
-	.N = SDCC_N(2),
-	.D = SDCC_D(2),
-	}
-};
-
 static struct pll_vote_clk gpll0_vote_clk = {
 	.status = GPLL0_STATUS,
 	.status_bit = GPLL0_STATUS_ACTIVE,
@@ -86,7 +61,7 @@
 
 	clk_enable_cbc(priv->base + SDCC_AHB_CBCR(slot));
 	/* 800Mhz/div, gpll0 */
-	clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0,
+	clk_rcg_set_rate_mnd(priv->base, SDCC_CMD_RCGR(slot), div, 0, 0,
 			     CFG_CLK_SRC_GPLL0, 8);
 	clk_enable_gpll0(priv->base, &gpll0_vote_clk);
 	clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot));
@@ -94,14 +69,6 @@
 	return rate;
 }
 
-static const struct bcr_regs uart2_regs = {
-	.cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR,
-	.cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR,
-	.M = BLSP1_UART2_APPS_M,
-	.N = BLSP1_UART2_APPS_N,
-	.D = BLSP1_UART2_APPS_D,
-};
-
 /* UART: 115200 */
 static int clk_init_uart(struct msm_clk_priv *priv)
 {
@@ -109,7 +76,7 @@
 	clk_enable_vote_clk(priv->base, &gcc_blsp1_ahb_clk);
 
 	/* 7372800 uart block clock @ GPLL0 */
-	clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625,
+	clk_rcg_set_rate_mnd(priv->base, BLSP1_UART2_APPS_CMD_RCGR, 1, 144, 15625,
 			     CFG_CLK_SRC_GPLL0, 16);
 
 	/* Vote for gpll0 clock */
diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c
index a473161..479f977 100644
--- a/drivers/clk/qcom/clock-apq8096.c
+++ b/drivers/clk/qcom/clock-apq8096.c
@@ -26,31 +26,15 @@
 #define SDCC2_APPS_CBCR			(0x14004) /* branch control */
 #define SDCC2_AHB_CBCR			(0x14008)
 #define SDCC2_CMD_RCGR			(0x14010)
-#define SDCC2_CFG_RCGR			(0x14014)
-#define SDCC2_M				(0x14018)
-#define SDCC2_N				(0x1401C)
-#define SDCC2_D				(0x14020)
 
 #define BLSP2_AHB_CBCR			(0x25004)
 #define BLSP2_UART2_APPS_CBCR		(0x29004)
 #define BLSP2_UART2_APPS_CMD_RCGR	(0x2900C)
-#define BLSP2_UART2_APPS_CFG_RCGR	(0x29010)
-#define BLSP2_UART2_APPS_M		(0x29014)
-#define BLSP2_UART2_APPS_N		(0x29018)
-#define BLSP2_UART2_APPS_D		(0x2901C)
 
 /* GPLL0 clock control registers */
 #define GPLL0_STATUS_ACTIVE		BIT(30)
 #define APCS_GPLL_ENA_VOTE_GPLL0	BIT(0)
 
-static const struct bcr_regs sdc_regs = {
-	.cfg_rcgr = SDCC2_CFG_RCGR,
-	.cmd_rcgr = SDCC2_CMD_RCGR,
-	.M = SDCC2_M,
-	.N = SDCC2_N,
-	.D = SDCC2_D,
-};
-
 static const struct pll_vote_clk gpll0_vote_clk = {
 	.status = GPLL0_STATUS,
 	.status_bit = GPLL0_STATUS_ACTIVE,
@@ -69,7 +53,7 @@
 	int div = 5;
 
 	clk_enable_cbc(priv->base + SDCC2_AHB_CBCR);
-	clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0,
+	clk_rcg_set_rate_mnd(priv->base, SDCC2_CMD_RCGR, div, 0, 0,
 			     CFG_CLK_SRC_GPLL0, 8);
 	clk_enable_gpll0(priv->base, &gpll0_vote_clk);
 	clk_enable_cbc(priv->base + SDCC2_APPS_CBCR);
@@ -77,21 +61,13 @@
 	return rate;
 }
 
-static const struct bcr_regs uart2_regs = {
-	.cfg_rcgr = BLSP2_UART2_APPS_CFG_RCGR,
-	.cmd_rcgr = BLSP2_UART2_APPS_CMD_RCGR,
-	.M = BLSP2_UART2_APPS_M,
-	.N = BLSP2_UART2_APPS_N,
-	.D = BLSP2_UART2_APPS_D,
-};
-
 static int clk_init_uart(struct msm_clk_priv *priv)
 {
 	/* Enable AHB clock */
 	clk_enable_vote_clk(priv->base, &gcc_blsp2_ahb_clk);
 
 	/* 7372800 uart block clock @ GPLL0 */
-	clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 192, 15625,
+	clk_rcg_set_rate_mnd(priv->base, BLSP2_UART2_APPS_CMD_RCGR, 1, 192, 15625,
 			     CFG_CLK_SRC_GPLL0, 16);
 
 	/* Vote for gpll0 clock */
diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c
index 1576ef6..22ecd18 100644
--- a/drivers/clk/qcom/clock-qcom.c
+++ b/drivers/clk/qcom/clock-qcom.c
@@ -95,7 +95,7 @@
  * root set rate for clocks with half integer and MND divider
  * div should be pre-calculated ((div * 2) - 1)
  */
-void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
+void clk_rcg_set_rate_mnd(phys_addr_t base, uint32_t cmd_rcgr,
 			  int div, int m, int n, int source, u8 mnd_width)
 {
 	u32 cfg;
@@ -111,12 +111,12 @@
 	debug("m %#x n %#x d %#x div %#x mask %#x\n", m_val, n_val, d_val, div, mask);
 
 	/* Program MND values */
-	writel(m_val & mask, base + regs->M);
-	writel(n_val & mask, base + regs->N);
-	writel(d_val & mask, base + regs->D);
+	writel(m_val & mask, base + cmd_rcgr + RCG_M_REG);
+	writel(n_val & mask, base + cmd_rcgr + RCG_N_REG);
+	writel(d_val & mask, base + cmd_rcgr + RCG_D_REG);
 
 	/* setup src select and divider */
-	cfg  = readl(base + regs->cfg_rcgr);
+	cfg  = readl(base + cmd_rcgr + RCG_CFG_REG);
 	cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK);
 	cfg |= source & CFG_SRC_SEL_MASK; /* Select clock source */
 
@@ -126,20 +126,20 @@
 	if (n && n != m)
 		cfg |= CFG_MODE_DUAL_EDGE;
 
-	writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
+	writel(cfg, base + cmd_rcgr + RCG_CFG_REG); /* Write new clock configuration */
 
 	/* Inform h/w to start using the new config. */
-	clk_bcr_update(base + regs->cmd_rcgr);
+	clk_bcr_update(base + cmd_rcgr);
 }
 
 /* root set rate for clocks with half integer and mnd_width=0 */
-void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div,
+void clk_rcg_set_rate(phys_addr_t base, uint32_t cmd_rcgr, int div,
 		      int source)
 {
 	u32 cfg;
 
 	/* setup src select and divider */
-	cfg  = readl(base + regs->cfg_rcgr);
+	cfg  = readl(base + cmd_rcgr + RCG_CFG_REG);
 	cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK);
 	cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */
 
@@ -150,10 +150,10 @@
 	if (div)
 		cfg |= (2 * div - 1) & CFG_SRC_DIV_MASK;
 
-	writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
+	writel(cfg, base + cmd_rcgr + RCG_CFG_REG); /* Write new clock configuration */
 
 	/* Inform h/w to start using the new config. */
-	clk_bcr_update(base + regs->cmd_rcgr);
+	clk_bcr_update(base + cmd_rcgr);
 }
 
 const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate)
diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h
index 01088c1..7eb2636 100644
--- a/drivers/clk/qcom/clock-qcom.h
+++ b/drivers/clk/qcom/clock-qcom.h
@@ -12,6 +12,11 @@
 #define CFG_CLK_SRC_GPLL0_EVEN (6 << 8)
 #define CFG_CLK_SRC_MASK  (7 << 8)
 
+#define RCG_CFG_REG		0x4
+#define RCG_M_REG		0x8
+#define RCG_N_REG		0xc
+#define RCG_D_REG		0x10
+
 struct pll_vote_clk {
 	uintptr_t status;
 	int status_bit;
@@ -24,13 +29,6 @@
 	uintptr_t ena_vote;
 	int vote_bit;
 };
-struct bcr_regs {
-	uintptr_t cfg_rcgr;
-	uintptr_t cmd_rcgr;
-	uintptr_t M;
-	uintptr_t N;
-	uintptr_t D;
-};
 
 struct freq_tbl {
 	uint freq;
@@ -82,9 +80,9 @@
 void clk_enable_cbc(phys_addr_t cbcr);
 void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk);
 const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate);
-void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
+void clk_rcg_set_rate_mnd(phys_addr_t base, uint32_t cmd_rcgr,
 			  int div, int m, int n, int source, u8 mnd_width);
-void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div,
+void clk_rcg_set_rate(phys_addr_t base, uint32_t cmd_rcgr, int div,
 		      int source);
 
 static inline void qcom_gate_clk_en(const struct msm_clk_priv *priv, unsigned long id)
diff --git a/drivers/clk/qcom/clock-qcs404.c b/drivers/clk/qcom/clock-qcs404.c
index f5b3528..6582394 100644
--- a/drivers/clk/qcom/clock-qcs404.c
+++ b/drivers/clk/qcom/clock-qcs404.c
@@ -28,35 +28,22 @@
 #define BLSP1_UART2_BCR			(0x3028)
 #define BLSP1_UART2_APPS_CBCR		(0x302C)
 #define BLSP1_UART2_APPS_CMD_RCGR	(0x3034)
-#define BLSP1_UART2_APPS_CFG_RCGR	(0x3038)
-#define BLSP1_UART2_APPS_M		(0x303C)
-#define BLSP1_UART2_APPS_N		(0x3040)
-#define BLSP1_UART2_APPS_D		(0x3044)
 
 /* I2C controller clock control registerss */
 #define BLSP1_QUP0_I2C_APPS_CBCR	(0x6028)
 #define BLSP1_QUP0_I2C_APPS_CMD_RCGR	(0x602C)
-#define BLSP1_QUP0_I2C_APPS_CFG_RCGR	(0x6030)
 #define BLSP1_QUP1_I2C_APPS_CBCR	(0x2008)
 #define BLSP1_QUP1_I2C_APPS_CMD_RCGR	(0x200C)
-#define BLSP1_QUP1_I2C_APPS_CFG_RCGR	(0x2010)
 #define BLSP1_QUP2_I2C_APPS_CBCR	(0x3010)
 #define BLSP1_QUP2_I2C_APPS_CMD_RCGR	(0x3000)
-#define BLSP1_QUP2_I2C_APPS_CFG_RCGR	(0x3004)
 #define BLSP1_QUP3_I2C_APPS_CBCR	(0x4020)
 #define BLSP1_QUP3_I2C_APPS_CMD_RCGR	(0x4000)
-#define BLSP1_QUP3_I2C_APPS_CFG_RCGR	(0x4004)
 #define BLSP1_QUP4_I2C_APPS_CBCR	(0x5020)
 #define BLSP1_QUP4_I2C_APPS_CMD_RCGR	(0x5000)
-#define BLSP1_QUP4_I2C_APPS_CFG_RCGR	(0x5004)
 
 /* SD controller clock control registers */
 #define SDCC_BCR(n)			(((n) * 0x1000) + 0x41000)
-#define SDCC_CMD_RCGR(n)		(((n) * 0x1000) + 0x41004)
-#define SDCC_CFG_RCGR(n)		(((n) * 0x1000) + 0x41008)
-#define SDCC_M(n)			(((n) * 0x1000) + 0x4100C)
-#define SDCC_N(n)			(((n) * 0x1000) + 0x41010)
-#define SDCC_D(n)			(((n) * 0x1000) + 0x41014)
+#define SDCC_CMD_RCGR(n)		(((n + 1) * 0x1000) + 0x41004)
 #define SDCC_APPS_CBCR(n)		(((n) * 0x1000) + 0x41018)
 #define SDCC_AHB_CBCR(n)		(((n) * 0x1000) + 0x4101C)
 
@@ -70,10 +57,6 @@
 #define USB30_MOCK_UTMI_CMD_RCGR	(0x3901C)
 #define USB30_MOCK_UTMI_CFG_RCGR	(0x39020)
 #define USB30_MASTER_CMD_RCGR		(0x39028)
-#define USB30_MASTER_CFG_RCGR		(0x3902C)
-#define USB30_MASTER_M			(0x39030)
-#define USB30_MASTER_N			(0x39034)
-#define USB30_MASTER_D			(0x39038)
 #define USB2A_PHY_SLEEP_CBCR		(0x4102C)
 #define USB_HS_PHY_CFG_AHB_CBCR		(0x41030)
 
@@ -85,10 +68,6 @@
 #define EMAC_PTP_CMD_RCGR		(0x4e014)
 #define EMAC_PTP_CFG_RCGR		(0x4e018)
 #define EMAC_CMD_RCGR			(0x4e01c)
-#define EMAC_CFG_RCGR			(0x4e020)
-#define EMAC_M				(0x4e024)
-#define EMAC_N				(0x4e028)
-#define EMAC_D				(0x4e02c)
 
 
 /* GPLL0 clock control registers */
@@ -103,22 +82,6 @@
 	.vote_bit = BIT(10) | BIT(5) | BIT(4),
 };
 
-static const struct bcr_regs uart2_regs = {
-	.cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR,
-	.cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR,
-	.M = BLSP1_UART2_APPS_M,
-	.N = BLSP1_UART2_APPS_N,
-	.D = BLSP1_UART2_APPS_D,
-};
-
-static const struct bcr_regs sdc_regs = {
-	.cfg_rcgr = SDCC_CFG_RCGR(1),
-	.cmd_rcgr = SDCC_CMD_RCGR(1),
-	.M = SDCC_M(1),
-	.N = SDCC_N(1),
-	.D = SDCC_D(1),
-};
-
 static struct pll_vote_clk gpll0_vote_clk = {
 	.status = GPLL0_STATUS,
 	.status_bit = GPLL0_STATUS_ACTIVE,
@@ -133,60 +96,6 @@
 	.vote_bit = BIT(1),
 };
 
-static const struct bcr_regs usb30_master_regs = {
-	.cfg_rcgr = USB30_MASTER_CFG_RCGR,
-	.cmd_rcgr = USB30_MASTER_CMD_RCGR,
-	.M = USB30_MASTER_M,
-	.N = USB30_MASTER_N,
-	.D = USB30_MASTER_D,
-};
-
-static const struct bcr_regs emac_regs = {
-	.cfg_rcgr = EMAC_CFG_RCGR,
-	.cmd_rcgr = EMAC_CMD_RCGR,
-	.M = EMAC_M,
-	.N = EMAC_N,
-	.D = EMAC_D,
-};
-
-static const struct bcr_regs emac_ptp_regs = {
-	.cfg_rcgr = EMAC_PTP_CFG_RCGR,
-	.cmd_rcgr = EMAC_PTP_CMD_RCGR,
-	.M = EMAC_M,
-	.N = EMAC_N,
-	.D = EMAC_D,
-};
-
-static const struct bcr_regs blsp1_qup0_i2c_apps_regs = {
-	.cmd_rcgr = BLSP1_QUP0_I2C_APPS_CMD_RCGR,
-	.cfg_rcgr = BLSP1_QUP0_I2C_APPS_CFG_RCGR,
-	/* mnd_width = 0 */
-};
-
-static const struct bcr_regs blsp1_qup1_i2c_apps_regs = {
-	.cmd_rcgr = BLSP1_QUP1_I2C_APPS_CMD_RCGR,
-	.cfg_rcgr = BLSP1_QUP1_I2C_APPS_CFG_RCGR,
-	/* mnd_width = 0 */
-};
-
-static const struct bcr_regs blsp1_qup2_i2c_apps_regs = {
-	.cmd_rcgr = BLSP1_QUP2_I2C_APPS_CMD_RCGR,
-	.cfg_rcgr = BLSP1_QUP2_I2C_APPS_CFG_RCGR,
-	/* mnd_width = 0 */
-};
-
-static const struct bcr_regs blsp1_qup3_i2c_apps_regs = {
-	.cmd_rcgr = BLSP1_QUP3_I2C_APPS_CMD_RCGR,
-	.cfg_rcgr = BLSP1_QUP3_I2C_APPS_CFG_RCGR,
-	/* mnd_width = 0 */
-};
-
-static const struct bcr_regs blsp1_qup4_i2c_apps_regs = {
-	.cmd_rcgr = BLSP1_QUP4_I2C_APPS_CMD_RCGR,
-	.cfg_rcgr = BLSP1_QUP4_I2C_APPS_CFG_RCGR,
-	/* mnd_width = 0 */
-};
-
 static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate)
 {
 	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
@@ -194,7 +103,7 @@
 	switch (clk->id) {
 	case GCC_BLSP1_UART2_APPS_CLK:
 		/* UART: 115200 */
-		clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 0, 12, 125,
+		clk_rcg_set_rate_mnd(priv->base, BLSP1_UART2_APPS_CMD_RCGR, 0, 12, 125,
 				     CFG_CLK_SRC_CXO, 16);
 		clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR);
 		break;
@@ -203,7 +112,7 @@
 		break;
 	case GCC_SDCC1_APPS_CLK:
 		/* SDCC1: 200MHz */
-		clk_rcg_set_rate_mnd(priv->base, &sdc_regs, 7, 0, 0,
+		clk_rcg_set_rate_mnd(priv->base, SDCC_CMD_RCGR(0), 7, 0, 0,
 				     CFG_CLK_SRC_GPLL0, 8);
 		clk_enable_gpll0(priv->base, &gpll0_vote_clk);
 		clk_enable_cbc(priv->base + SDCC_APPS_CBCR(1));
@@ -213,16 +122,16 @@
 		break;
 	case GCC_ETH_RGMII_CLK:
 		if (rate == 250000000)
-			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 0, 0,
+			clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 3, 0, 0,
 					     CFG_CLK_SRC_GPLL1, 8);
 		else if (rate == 125000000)
-			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 7, 0, 0,
+			clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 7, 0, 0,
 					     CFG_CLK_SRC_GPLL1, 8);
 		else if (rate == 50000000)
-			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 19, 0, 0,
+			clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 19, 0, 0,
 					     CFG_CLK_SRC_GPLL1, 8);
 		else if (rate == 5000000)
-			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 1, 50,
+			clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 3, 1, 50,
 					     CFG_CLK_SRC_GPLL1, 8);
 		break;
 	default:
@@ -239,7 +148,7 @@
 	switch (clk->id) {
 	case GCC_USB30_MASTER_CLK:
 		clk_enable_cbc(priv->base + USB30_MASTER_CBCR);
-		clk_rcg_set_rate_mnd(priv->base, &usb30_master_regs, 7, 0, 0,
+		clk_rcg_set_rate_mnd(priv->base, USB30_MASTER_CMD_RCGR, 7, 0, 0,
 				     CFG_CLK_SRC_GPLL0, 8);
 		break;
 	case GCC_SYS_NOC_USB3_CLK:
@@ -261,14 +170,14 @@
 		/* SPEED_1000: freq -> 250MHz */
 		clk_enable_cbc(priv->base + ETH_PTP_CBCR);
 		clk_enable_gpll0(priv->base, &gpll1_vote_clk);
-		clk_rcg_set_rate_mnd(priv->base, &emac_ptp_regs, 3, 0, 0,
+		clk_rcg_set_rate_mnd(priv->base, EMAC_PTP_CMD_RCGR, 3, 0, 0,
 				     CFG_CLK_SRC_GPLL1, 8);
 		break;
 	case GCC_ETH_RGMII_CLK:
 		/* SPEED_1000: freq -> 250MHz */
 		clk_enable_cbc(priv->base + ETH_RGMII_CBCR);
 		clk_enable_gpll0(priv->base, &gpll1_vote_clk);
-		clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 0, 0,
+		clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 3, 0, 0,
 				     CFG_CLK_SRC_GPLL1, 8);
 		break;
 	case GCC_ETH_SLAVE_AHB_CLK:
@@ -282,27 +191,27 @@
 		break;
 	case GCC_BLSP1_QUP0_I2C_APPS_CLK:
 		clk_enable_cbc(priv->base + BLSP1_QUP0_I2C_APPS_CBCR);
-		clk_rcg_set_rate(priv->base, &blsp1_qup0_i2c_apps_regs, 0,
+		clk_rcg_set_rate(priv->base, BLSP1_QUP0_I2C_APPS_CMD_RCGR, 0,
 				 CFG_CLK_SRC_CXO);
 		break;
 	case GCC_BLSP1_QUP1_I2C_APPS_CLK:
 		clk_enable_cbc(priv->base + BLSP1_QUP1_I2C_APPS_CBCR);
-		clk_rcg_set_rate(priv->base, &blsp1_qup1_i2c_apps_regs, 0,
+		clk_rcg_set_rate(priv->base, BLSP1_QUP1_I2C_APPS_CMD_RCGR, 0,
 				 CFG_CLK_SRC_CXO);
 		break;
 	case GCC_BLSP1_QUP2_I2C_APPS_CLK:
 		clk_enable_cbc(priv->base + BLSP1_QUP2_I2C_APPS_CBCR);
-		clk_rcg_set_rate(priv->base, &blsp1_qup2_i2c_apps_regs, 0,
+		clk_rcg_set_rate(priv->base, BLSP1_QUP2_I2C_APPS_CMD_RCGR, 0,
 				 CFG_CLK_SRC_CXO);
 		break;
 	case GCC_BLSP1_QUP3_I2C_APPS_CLK:
 		clk_enable_cbc(priv->base + BLSP1_QUP3_I2C_APPS_CBCR);
-		clk_rcg_set_rate(priv->base, &blsp1_qup3_i2c_apps_regs, 0,
+		clk_rcg_set_rate(priv->base, BLSP1_QUP3_I2C_APPS_CMD_RCGR, 0,
 				 CFG_CLK_SRC_CXO);
 		break;
 	case GCC_BLSP1_QUP4_I2C_APPS_CLK:
 		clk_enable_cbc(priv->base + BLSP1_QUP4_I2C_APPS_CBCR);
-		clk_rcg_set_rate(priv->base, &blsp1_qup4_i2c_apps_regs, 0,
+		clk_rcg_set_rate(priv->base, BLSP1_QUP4_I2C_APPS_CMD_RCGR, 0,
 				 CFG_CLK_SRC_CXO);
 		break;
 	default:
diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c
index 36ffee7..5d6c0cd 100644
--- a/drivers/clk/qcom/clock-sdm845.c
+++ b/drivers/clk/qcom/clock-sdm845.c
@@ -19,13 +19,7 @@
 
 #include "clock-qcom.h"
 
-#define SE9_AHB_CBCR		0x25004
-#define SE9_UART_APPS_CBCR	0x29004
 #define SE9_UART_APPS_CMD_RCGR	0x18148
-#define SE9_UART_APPS_CFG_RCGR	0x1814C
-#define SE9_UART_APPS_M		0x18150
-#define SE9_UART_APPS_N		0x18154
-#define SE9_UART_APPS_D		0x18158
 
 static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = {
 	F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625),
@@ -46,14 +40,6 @@
 	{ }
 };
 
-static const struct bcr_regs uart2_regs = {
-	.cfg_rcgr = SE9_UART_APPS_CFG_RCGR,
-	.cmd_rcgr = SE9_UART_APPS_CMD_RCGR,
-	.M = SE9_UART_APPS_M,
-	.N = SE9_UART_APPS_N,
-	.D = SE9_UART_APPS_D,
-};
-
 static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate)
 {
 	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
@@ -62,7 +48,7 @@
 	switch (clk->id) {
 	case GCC_QUPV3_WRAP1_S1_CLK: /* UART9 */
 		freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate);
-		clk_rcg_set_rate_mnd(priv->base, &uart2_regs,
+		clk_rcg_set_rate_mnd(priv->base, SE9_UART_APPS_CMD_RCGR,
 				     freq->pre_div, freq->m, freq->n, freq->src, 16);
 		return freq->freq;
 	default: